4 & 5 Port Solenoid Valves and Manifolds
|
SJ series - The SJ series was developed by SMC to offer a small, low profile, low maintenance, 4-port solenoid valve and manifold. The series was designed in a cassette type format, uses a card-edge type connector, and is available in two compact sizes. The SJ2000 measures 7.5mm wide, while the large SJ3000 model is only 10mm wide. The SJ2000/3000 can be combined in the same manifold, which can provide up to 24 stations and 32 solenoids. The valves feature a special lock switch mechanism assuring they are securely locked together, and are compatible with Serial Interface units for both CC-Link and DeviceNet protocols.
SJ series (pdf) |
 |
|
SV series - The SV series employs a multi-connector instead of the conventional lead wires for internal manifold wiring. By connecting each block with a connector, changes to manifold stations are greatly simplified. Cassette base type manifolds offer the ultimate in flexibility. Manifold sections can be added using a simple release mechanism. Conventional tie-rod base type manifolds are also available. The use of 34 pin connectors allows up to 16 stations with double solenoids.
SV series (pdf) |
 |
|
VQC series - The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
VQC series (pdf) |
 |
|
SY series - Series SY offers major advances in valve performance for cost-effective solutions to your requirements. The series offers high flow with low power consumption in a compact design. The SY is available in body ported or base mounted styles and can be used individually or manifold mounted.
SY series (pdf) |
 |
|
(New) SY series - SMC has improved product performance and reliability with the redesigned SY series valve. The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved. Side, top and bottom port/pipe directions are available to allow flexible installation. The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.
New SY series (pdf) |
 |
|
VQ series - VQ valves are ideal for applications requiring high speed, frequent operation, stable response time and long service life. Innovative mounting methods allow valves to be changed without entirely disassembling the manifold. Built-in one-touch fittings save piping time and labor.
VQ series (pdf) |
 |
|
SYJ series - The SYJ Valve is an innovative combination of space efficiency and performance superiority which provides real value to the design solution. Whether designed in a manifold or used as a single valve, this small profile increases design flexibility and minimizes space requirements. The SYJ valve utilizes a low power (0.5 watts standard) pilot solenoid design, which dramatically reduces thermal heat generation. This improves performance, decreases operating costs, and allows for direct control by PLC output relays. All electrical connections for SYJ Valves are available with lights and surge suppression. SYJ series valves can be configured on base mounted manifolds, or individually on subplates, creating a variety of solutions to meet your broadest engineering needs.
SYJ series (pdf) |
 |
|
VFR series - Series VFR consists of 5 port pilot solenoid valves with rubber seals and base mounted type manifolds, available in plug-in and non plug-in styles. Port sizes range from 1/8 to 1/2 with Rc(PT), NPTF & G(PF) thread types available. Various options also available.
VFR series (pdf) |
 |
|
VFS series - Series VFS consists of 5 port pilot solenoid valves with metal seals and base mounted or body ported type manifolds. Base mounted manifolds are available in plug-in and non plug-in styles. Body ported manifolds are available with bar or separate type manifold bases. Port sizes range from 1/8 to 3/4 with Rc(PT), NPTF & G(PF) thread types available. Various options also available.
VFS series (pdf) |
 |
|
VK series - The VK3000 series is a 5 port solenoid, direct poppet, rubber seal valve. It meets copper free specifications as all parts in contact with fluids are made of non-copper materials. A compact valve (width 18 x length 68mm), the VK3000 is available in a body ported or base mounted style.
VK series (pdf) |
 |
|
VQD series - VQD1000 series 4 port, direct operated, poppet solenoid valve offers large flow capacity in a compact, lightweight body. Vacuum applications (up to -100kPa) are possible. Components of the VQD1000 valves that are in contact with fluid are all copper free. The VQD series offers a remarkably quick and stable response time.
VQD series (pdf) |
 |
|
VQ7 series - SMC's VQ7-6/7-8 series valve conforms to ISO standard 5591/I. A choice of metal or rubber seal increases compatibility with various operating and environmental conditions. Manifolds are available with a wide range of interface options to meet a variety of application requirements. The VQ7-6/7-8 has a smaller, space-saving profile and is lighter in weight than the VS7/VP7 series.
VQ7 series (pdf) |
 |
|
| VSS/VSR series - VSS/VSR size 1, 2 & 3 are plug-in, base mounted interface valves conforming to ISO standards. The valve design offers maximum flexibility and is available in either a high flow rubber seal (model VSR), or matched ground spool and sleeve (model VSS). The lateral plug-in style manifold makes it easy to increase or decrease the manifold stations without wiring work. In addition, SMC now offers a light weight, large capacity mini ISO valve (size 01). |
 |
|
SQ series - The 5 port solenoid valves series SQ was designed for applications which demand high speed, high frequency, long life and a precise response time. The SQ series has an outstanding response time of 12ms or less for SQ1000, 20ms or less for SQ2000 and a life of 200 million cycles. A wide variety of options are available.
SQ series (pdf) |
 |
|
SX series - The SX series unique design combines both solenoid assemblies (when using double solenoid 2/3 position) on the same side of the valve, opposite the ports, allowing for greater space savings and simplified wiring access. The SX series valves are available with numerous manifold options which allow for easier installation and improved operation.
SX series (pdf) |
 |
|
SZ series - Series SZ3000 is a 5 port solenoid valve, body ported type with a cassette style manifold. The SZ series offers high reliability and long life of 50 million cycles or more. The connector entry direction can be changed from top to side with a simple operation. Low power consumption and a fast response time of 10ms are obtained with a unique pilot valve construction.
SZ series (pdf) |
 |
|
VZ series - The VZ series consists of 4 & 5 port solenoid valves with rubber seal. Base mounted and body ported valves are available with standard, flat cable, DIN rail mounted plug-in and non plug-in manifolds. Various options are available. The VZ series is still available although direct replacements for each series have been implemented. See individual series information for replacements.
VZ series (pdf) |
 |
|
VQZ series - Series VQZ base mount solenoid valves combine convenience with durability and performance in a more traditional mounting style. Series VQZ Body Ported Solenoid Valves combine flexibility with high performance and long life in an inline body style.
VQZ series (pdf) |
 |
|
VZS series - The VZS series is a 5 port pilot solenoid, base mounted type valve, available in a plug-in or non plug-in style. The metal seal makes it possible for use in non-lubrication and dry air. Manifold options include control unit, serial interface unit and a coaxial fitting.
VZS series (pdf) |
 |
|
| VJ series - The VJ series is a rubber seal solenoid valve available in a body ported or base mounted version. The VJ3000 based mounted valve is offered in a 4 or 5 port style, while the body ported version is a 5 port valve. The VJ5000 and VJ7000 series, body ported and base mounted are 5 port. Although the VJ series standard power consumption is 1WDC, a low watt type (0.45WDC) is available. |
 |
|
VF series - Series VF, a five port pilot solenoid valve, offers large flow capacity in a compact size. The VF is available in many variations including three types of manual override and four types of electrical entry. Common exhaust for main valve and pilot valve is also available.
VF series (pdf) |
 |
|
VS7 series - Dimensions of SMC's VS7 series conform to ISO interface sizes 1 and 2. The pilot operated metal seal design allows the valve to be used with non-lube dry air and still maintain a long life. The VS7 is available in 2 or 3 position, double or single action. Manifolds are available with a large variety of functions and piping configurations.
VS7 series (pdf) |
 |
|
SO700 series - SMC's S0700 series offers a compact valve and manifold design with high flow capacity. The 5 port solenoid valve has a 7mm width, and is available in both plug-in and plug lead types. Applicable manifolds include serial transmission types, D-sub connectors, flat ribbon cable, PC wiring system compatible, flat ribbon cable, terminal block, lead wire, and circulator connectors.
SO700 series (pdf) |
 |
|
|
3 Port Solenoid Valves and Manifolds
|
SY series - Series SY offers major advances in valve performance for cost-effective solutions to your requirements. The series offers high flow with low power consumption in a compact design. The SY is available in body ported or base mounted styles and can be used individually or manifold mounted.
SY100 series (pdf) |
 |
|
VQZ series - Series VQZ base mount solenoid valves combine convenience with durability and performance in a more traditional mounting style. Series VQZ Body Ported Solenoid Valves combine flexibility with high performance and long life in an inline body style.
VQZ series (pdf) |
 |
|
SYJ series - The SYJ Valve is an innovative combination of space efficiency and performance superiority which provides real value to the design solution. Whether designed in a manifold or used as a single valve, this small profile increases design flexibility and minimizes space requirements. The SYJ valve utilizes a low power (0.5 watts standard) pilot solenoid design, which dramatically reduces thermal heat generation. This improves performance, decreases operating costs, and allows for direct control by PLC output relays. All electrical connections for SYJ Valves are available with lights and surge suppression. SYJ series valves can be configured on base mounted manifolds, or individually on subplates, creating a variety of solutions to meet your broadest engineering needs.
SYJ series (pdf) |
 |
|
VQ series - VQ valves are ideal for applications requiring high speed, frequent operation, stable response time and long service life. Innovative mounting methods allow valves to be changed without entirely disassembling the manifold. Built-in one-touch fittings save piping time and labor.
VQ series (pdf) |
 |
|
V100 series - Customers looking for a compact, light-weight, high flow valve for piloting process valves or actuator applications, need search no longer. SMC's series V100 is one of the most advanced solenoid valves in today’s market. The standard V100 uses only 0.35w, which is 76% less than comparable valves. The low power model uses only 0.1w, reflecting dramatic savings of up to 93% compared to existing products. Weighing in at a mere 12g, with flow rates between 8.4 and 24 l/minute, it’s the perfect solution when space, performance, and component weight is critical.
V100 series (pdf) |
 |
|
AV series - Series AV is a soft start up valve for low-speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off air supply.
AV series (pdf) |
 |
|
S070 series - Series S070 is a super compact direct acting 2/3 port solenoid valve that meets the miniaturisation needs of analysers, medical equipment and semiconductor manufacturing equipment. S070 is extremely lightweight (5g for valve single unit type) and operation noise is 38dB(A) or less. It is easy to increase or decrease the number of stations (stacking base). Valve width is 7mm.
S070 series (pdf) |
 |
|
VDW series - The VDW200/300 series is a compact, direct operated, 3 port solenoid valve for water, air and vacuum. The use of a unique magnetic material reduces the operating resistance of moving parts, improving service life, wear and corrosion resistance.
VDW series (pdf) |
 |
|
VX series - The VX3000 series is a direct operated, 3 port solenoid valve, for use with a wide variety of fluids. When used in combination with the manifold, configuration can be changed from N.C. to N.O. and from N.O. to N.C. by simply changing a gasket. Valves are easily replaced without changing existing piping.
VX series (pdf) |
 |
|
VV061 series - The VV061 series is a direct operated 3-way solenoid valve designed for 4 and 8 station units with integrated compact manifold, valve, circuit board, base and fittings forming a single compact unit. VV061 series model has an optional power saving circuit that can be used for long-term continuous duty. This unit is available with one-touch or barb fitting and an optional connector cable with lengths of 300, 600, or 1000mm.
VV061 series (pdf) |
 |
|
VS series - Series VS is a 3 port direct operated valve with metal seal. Body ported and base mounted styles are available. Multiple pressure supply is possible with balanced spool and sleeve. Any given port can accept high or low pressure supply without affecting the system life or operation. No-lubrication and dry-air operation is possible.
VS series (pdf) |
 |
|
VZ series - The VZ series consists of 3 port solenoid valves with rubber seals. Base mounted and body ported valves are available with standard, flat cable, DIN rail mounted plug-in and non plug-in manifolds. Various options are available. The VZ series is still available although direct replacements for each series have been implemented. See individual series information for replacements.
VZ series (pdf) |
 |
|
VG series - Series VG342 is a 3 port pilot poppet solenoid valve and can be used as a selector or divider valve (external pilot). Actuation is changeable between N.C., N.O., or external pilot types. VG342 is possible to use in vacuum or under low pressures. No lubrication is required.
VG series (pdf) |
 |
|
SJ3A6 series - Series SJ3A6 is a vacuum release valve equipped with a restrictor to enable flow rate adjustment of release air. This space saving series is 10mm wide, designed in a cassette type format and uses a card-edge type connector. The SJ3A6 valves are compatible with Serial Interface units for both CC-Link and DeviceNet protocols.
SJ3A6 series (pdf) |
 |
|
VKF series - A 3-port, direct operated poppet solenoid valve, series VKF300 is compact (body width 18mm), yet still provides a large flow capacity. The VKF300 manual overrides are located in 2 directions, on the top and on the side of the valve, providing easy manual operation unaffected by mounting space and piping direction. FKM (Fluoro rubber) is used for the fluid-contact rubber materials, allowing use even in ozone environments.
VKF series (pdf) |
 |
|
VP series - SMC's VP300/500/700 series solenoid valve, offers high flow capacity and reduced power consumption (1.55W standard, 0.55W with power saving circuit). The VP series may be used as either a selector valve, or a divider valve. It is available in a normally closed or a normally open style. The series is vacuum applicable up to –101.2kPa.
VP series (pdf) |
 |
|
SGH series - High pressure coolant valve, series SGH, for high pressure coolant liquid (up to 3MPa/7MPa) is ideal for lubrication, dust blowing and cooling. Based on SMC's tests the service life is 3 million cycles. The SGH is available in both external pilot solenoid and air operated types, and has CE accreditation.
SGH series (pdf) |
 |
|
VT series - Series VT 3port, direct operated poppet valves are compact in size, yet provide large flow capacity, and low power consumption. The series is suitable for use in vacuum applications. The VT valve is a single valve with 6 functions (universal porting type) such as N.C. valve, N.O. valve, divider valve, selector valve, etc. The manifold style valve, series VO, can be easily converted from N.C. (normally closed) to N.O. (normally open) by merely turning over the switch cover.
VT series (pdf) |
 |
|
VCH series - Series VCH 2 and 3 port, pilot operated, solenoid valves offer improved durability under a high pressure environment. Designed for use with air or inert gas, the VCH valve can operate up to a maximum pressure of 5.0MPa. Large flow passages and ISO 1179-1 conforming port thread sizes of G1/2 to G1 ensure high flow rates, and due to a reduction in the overall volume of the pilot chamber, the VCH's responsiveness can now only be measured in milliseconds. Non-collision armature construction, rubber buffers and a urethane diaphragm give the VCH series an expected service life of 10 million cycles.
VCH series (pdf) |
 |
|
|
2 Port Solenoid Valves and Manifolds
|
VX series - Series VX21/22/23, direct operated 2 port solenoid valve for air, gas, vacuum, water, steam and oil. Proper selection of body and sealing materials permits application of a wide variety of fluids. Application can be matched by simply choosing body materials (brass, stainless steel), seal materials (NBR, EPR, FPM, PTFE) and the solenoid coil (class B, class H).
VX series (pdf) |
 |
|
VXH series - Series VXH is a 2 port, pilot operated solenoid valve designed for high pressure control. Applicable fluids include water, air and oil. The VXH is available with 1/4, 3/8 or 1/2 port sizes. Maximum operating pressure is 2MPa.
VXH series (pdf) |
 |
|
VDW series - The VDW series is a compact, direct operated, 2/3 port solenoid valve for water, air and vacuum. The use of a unique magnetic material reduces the operating resistance of moving parts, improving service life, wear and corrosion resistance.
VDW series (pdf) |
 |
|
SGC series - Series SGC coolant valve, with both CE and RoHS accreditation, provides the perfect solution for high speed machining. Due to the SGC’s unique scraper, squeeze seal, grease channel and dry bearing construction, the valve’s service life will exceed 5 million cycles. The introduction of a built-in magnet allows auto switches to be fitted, enabling confirmation of whether the valve is open or closed. The SGC is available in air operated, and external pilot solenoid types.
SGC series (pdf) |
 |
|
SGH series - High pressure coolant valve, series SGH, for high pressure coolant liquid (up to 3MPa/7MPa) is ideal for lubrication, dust blowing and cooling. Based on SMC's tests the service life is 3 million cycles. The SGH is available in both external pilot solenoid and air operated types, and has CE accreditation.
SGH series (pdf) |
 |
|
VC series - Series VC is a multipurpose, direct operated, 2 port solenoid valve for air. Special construction reduces operating resistance and moving parts for improved longevity and wear resistance. A built-in rectifier eliminates AC coil burning and buzzing. The VC enclosure is IP65 equivalent.
VC series (pdf) |
 |
|
VCH series - Series VCH 2 and 3 port, pilot operated, solenoid valves offer improved durability under a high pressure environment. Designed for use with air or inert gas, the VCH valve can operate up to a maximum pressure of 5.0MPa. Large flow passages and ISO 1179-1 conforming port thread sizes of G1/2 to G1 ensure high flow rates, and due to a reduction in the overall volume of the pilot chamber, the VCH's responsiveness can now only be measured in milliseconds. Non-collision armature construction, rubber buffers and a urethane diaphragm give the VCH series an expected service life of 10 million cycles.
VCH series (pdf) |
 |
|
LVM series - Series LVM is a compact, direct acting, 2/3 port solenoid valve for chemicals. The unique construction reduces residual liquid to a minimum. Superior resistance to chemicals requires less maintenance. Service life (based on SMC test conditions) is 10 million cycles or more.
LVM series (pdf) |
 |
|
VXD series - Series VXD, pilot 2 port solenoid valve for air, gas, water and oil. VXD can be quickly disassembled and reassembled. Variations include, energized open (N.C) and energized closed (N.O) valve, solenoid coil (class B, class H), brass/BC6 or stainless steel body material and NBR, FPM, EPR seal materials.
VXD series (pdf) |
 |
|
VXZ series - The VXZ series is a 2 port, pilot operated solenoid valve capable of operating at higher differential pressures by maintaining a zero differential pressure on the seat. The molded coil offers low power consumption, long life and high reliability.
VXZ series (pdf) |
 |
|
VN series - The VN external pilot solenoid series offers 5 models of 2 and 3 port valves for general purpose use. Model VNA process valve is for compressed air and air-hydro circuit control. Model VNB for flow control permits application with a wide variety of fluids such as air, water, oil, gas and vacuum. VNC is a coolant valve available in a wide selection of port sizes and variations. The high pressure coolant valve, series VNH, is ideal for lubrication, dust blowing and cooling. By the adoption of a PTFE seal, the VND valve is suited for steam applications (max. 180°C).
VN series (pdf) |
 |
|
VQ20 series - The VQ20/30 series is a pilot operated, two port multi-media valve. The series is compact and lightweight with a large flow capacity. The VQ20/30's long life, high speed coil (up to 20 million cycles at 100cps for pneumatic use) along with its all plastic construction, make it an excellent choice for those who want high performance at a lower cost.
VQ20 series (pdf) |
 |
|
VXP series - Series VXP pilot operated 2 port solenoid valve for air, gas, steam, water and oil. Variations include energized open (N.C) and energized closed (N.O) valves, class B or class H coils, brass, BC6, or stainless steel body materials and NBR, FPM, EPR, PTFE seal materials.
VXP series (pdf) |
 |
|
VXR series - Water hammer relief, pilot operated 2 port solenoid valve series VXR is for use with water and oil. Variations include energized open (N.C) and energized closed (N.O) valves, BC6 body material and NBR, FPM seal materials.
VXR series (pdf) |
 |
|
VXE series - SMC has developed the VXE series energy saving type, 2 port solenoid valve to help with environmental issues. The PWM (Pulse Width Modulation) method was used to allow for less power consumption. By reducing the energy consumption we have also reduced the heat produced by the coil. This series is available in three styles VXE directed operated, VXED pilot operated, and VXEZ zero differential pressure type pilot operated. These valves are normally closed, 12 or 24VDC and are available for air, water, or oil applications.
VXE series (pdf) |
 |
|
VXS series - Developed with high performance in mind, SMC's series VXS 2 port solenoid valve is compact and lightweight, designed to operate with no need for differential pressure. The VXS is considerably quieter than similar valves due to its' special construction and full wave rectifier type solenoid. A piston main valve and special FKM material for both the valve and seal help reduce internal leakage to 1.0cm3/min or less, and improve life cycle and valve reliability. The VXS valve series is RoHS compliant and meets IP65 enclosure guidelines.
VXS series (pdf) |
 |
|
|
Proportional Valves
|
PVQ series - PVQ series, compact proportional solenoid valve, was desgined by SMC with a direct poppet construction. This construction enables low leakage, while de-energized. PVQ series has been used in applications such as air blow, flow control, hand piece control for dental unit and other respiratory equipment, as well as, cooling for laser machinery etc.
PVQ series (pdf) |
 |
|
VEP series - A proportional control valve system provides the ability to infinitely control the position of the internal spool assembly which increases or decreases the amount of flow or pressure being released from the valve. SMC offers 2 types of proportional control valves, a pressure type (N)VEP which controls secondary pressure by varying the current through the solenoid, and a flow rate type (N)VEF which controls air flow by varying current through the solenoid.
VEP series (pdf) |
 |
|