800-999-7378
Phoenix Contact 2900312, PLC-RPT- 24DC/ 1/ACT, Relay Module
PLC-INTERFACE for output functions, consisting of PLC-BPT.../ACT basic terminal block with push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
$23.47
/EA
Availability:
Lead Time: 27 bus. days
Item ID | PHOENIX 2900312 |
Manufacturer Part # | 2900312 |
AHC Part # | 2340101 |
Unit Size | 1 |
Brand | Phoenix Contact |
Features
- Actuator connected directly to relay module
- Efficient connection to system cabling using V8 adapter
- No need for additional modular terminal blocks
- Time savings of up to 60 %
- Relay modules with safe isolation according to DIN EN 50178 between coil and contact
- Space savings of up to 80 %
- Functional plug-in bridges
Tech Specifications
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
| Width | 6.2 mm |
| Height | 80 mm |
| Depth | 94 mm |
| Ambient temperature (operation) | -40 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Nominal input voltage U<sub>N</sub> | 24 V DC |
| Typical input current at U<sub>N</sub> | 9 mA |
| Typical response time | 5 ms |
| Typical release time | 8 ms |
| Protective circuit | Reverse polarity protection Polarity protection diode |
| Protective circuit | Free-wheeling diode Damping diode |
| Operating voltage display | Yellow LED |
| Power dissipation for nominal condition | 0.22 W |
| Contact type | 1 N/O contact |
| Type of switch contact | Single contact |
| Contact material | AgSnO |
| Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
| Minimum switching voltage | 5 V (at 100 mA) |
| Min. switching current | 10 mA (at 12 V) |
| Maximum inrush current | 10 A (4 s) |
| Limiting continuous current | 6 A |
| Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
| Interrupting rating (ohmic load) max. | 20 W (at 48 V DC) |
| Interrupting rating (ohmic load) max. | 18 W (at 60 V DC) |
| Interrupting rating (ohmic load) max. | 23 W (at 110 V DC) |
| Interrupting rating (ohmic load) max. | 40 W (at 220 V DC) |
| Interrupting rating (ohmic load) max. | 1500 VA (for 250 V AC) |
| Switching capacity | 2 A (at 24 V, DC13) |
| Switching capacity | 0.2 A (at 110 V, DC13) |
| Switching capacity | 0.1 A (at 220 V, DC13) |
| Switching capacity | 3 A (at 24 V, AC15) |
| Switching capacity | 3 A (at 120 V, AC15) |
| Switching capacity | 3 A (at 230 V, AC15) |
| Connection name | Coil side |
| Connection Method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² () |
| Conductor cross section flexible | 2x 0.5 mm² ... 1 mm² () |
| Conductor cross section AWG | 26 ... 14 |
| Connection name | Contact side |
| Connection Method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² () |
| Conductor cross section flexible | 2x 0.5 mm² ... 1 mm² () |
| Conductor cross section AWG | 26 ... 14 |
| Test voltage relay winding/relay contact | 4 kV AC (50 Hz, 1 min.) |
| Operating mode | 100% operating factor |
| Degree of protection | RT III (Relay) |
| Degree of protection | IP20 (Relay base) |
| Mechanical service life | 2x 107 cycles |
| Mounting position | any |
| Assembly instructions | In rows with zero spacing |
| Connection in acc. with standard | CUL |
| Designation | Standards/regulations |
| Standards/regulations | IEC 60664 |
| Standards/regulations | IEC 60664A |
| Standards/regulations | DIN VDE 0110 |
| Standards/regulations | DIN EN 50178/DIN VDE 0160 (in relevant parts) |
| Standards/regulations | DIN EN 50178/VDE 0160 |
| Standards/regulations | IEC 60255/DIN VDE 0435 (in relevant parts) |
| Degree of pollution | 3 |
| Overvoltage category | III |
| Flammability rating according to UL 94 | V0 |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 |
| China RoHS | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Net weight (SAP) | 31.27 g |
Links
Accessory Items
Related To
| This item is a(n)... | of the following product... | |
|---|---|---|
| Accessory |  | |
| Accessory |  | |
| Accessory |  | |
| Accessory |  | |
| Accessory |  | |
| Accessory |  | |
Frequently Purchased Together
Availability:
10 - Bristol, PA -- Storeroom
Qty:
$30.23
/EA
Availability:
13 - Bristol, PA -- Storeroom
Qty:
$9.74
/EA
Availability:
31 - Bristol, PA -- Storeroom
Qty:
$23.10
/EA
Availability:
22 - Bristol, PA -- Storeroom
Qty:
$33.38
/EA
Availability:
154 - Bristol, PA -- Storeroom
Qty:
$1.66
/EA
