LAT3, Card Motor

The LAT3 Card Motor deviates from LE actuators by implementing a unique magnetic linear motor. The ultra-compact body, integrating the recirculating ball guide, motor and encoder, is about the size of a credit card and only 9mm high. Positioning repeatability is ±5 μm, with an operating rate of up to 500 cycles per minute.
  • Maximum load mass: 500g (horizontal), 100g (vertical)
  • Maximum pushing force: 5.5N
  • Strokes: 10, 20, 30 mm
  • Weight: 130, 190, or 250g (stroke dependent)
  • Positioning repeatability: ±5 µm (“F” resolution option)
  • Parts measurement repeatability: ±10 µm (“F” resolution option)
Configuration Options
 Part Number is Partial
LAT3  -            
Copy Configuration Number
Select Product Options
Select values from the drop down lists or make appropriate selections to configure the part number.
Sensor Resolution Configuration Status
Stroke Configuration Status
Actuator Cable Length Configuration Status
Controller Configuration Status
I/O Cable Length Configuration Status
Controller Mounting Configuration Status
Options in:
  • Gray are not compatible with other selected option value.
  • Red conflict with another selected option value.
  • Amber are not recommended.
Options in:
  • Gray are not compatible with other selected option value.
  • Red conflict with another selected option value.
  • Amber are not recommended.

Downloads

The part number needs to be complete in order to view/download CAD Models.

CAD Downloads

Product Catalog