Airline Hydraulcs

LECPA PLC Pulse Input for Incremental Encoders

Back to Search

Products » Electric Actuators » Controllers & Drivers » 24VDC Controllers, Single Axis
LECPA Step Motor Driver, Pulse Input Type for LEY Series

LECPA Step Motor Driver, Pulse Input Type for LEY Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)

LECPA Step Motor Driver, Pulse Input Type for LEYG Series

LECPA Step Motor Driver, Pulse Input Type for LEYG Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)

LECPA Step Motor Driver, Pulse Input Type for LEFS Series

LECPA Step Motor Driver, Pulse Input Type for LEFS Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)

LECPA Step Motor Driver, Pulse Input Type for LEFB Series

LECPA Step Motor Driver, Pulse Input Type for LEFB Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)

LECPA Step Motor Driver, Pulse Input Type for LESH Series

LECPA Step Motor Driver, Pulse Input Type for LESH Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)

LECPA Step Motor Driver, Pulse Input Type for LES Series

LECPA Step Motor Driver, Pulse Input Type for LES Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)

LECPA Step Motor Driver, Pulse Input Type for LER Series

LECPA Step Motor Driver, Pulse Input Type for LER Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)

LECPA Step Motor Driver, Pulse Input Type for LEPY/LEPS Series

LECPA Step Motor Driver, Pulse Input Type for LEPY/LEPS Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)

LECPA Step Motor Driver, Pulse Input Type for LEH Series

LECPA Step Motor Driver, Pulse Input Type for LEH Series

The LECPA is a driver for LE’s 24VDC step motors. This driver controls motion by interpreting a pulse input signal from the PLC instead of calls to a step data table. Separate control and motor power enable the motor to be turned off without losing the encoder position. Additional features include alarm detection and in-range AREA output signals.
  • Pulse signal input types permitted: open collector, differential
  • Compatible motor: 24VDC step motor with incremental A/B phase encoder
  • NPN or PNP parallel I/O types
  • POWER and ALARM LED’s
  • Screw or DIN rail mounting
  • Configuration software required (sold separately)